Frequently Asked Questions
1. Specification and use of the relay box
The relay box is an option to CTSmall, and is _not_ included. It is for indoor use only!
With the relay box it is possible to make control of external devices. It can be a floor heater, water heater or lamps. It is up to you.
There are 4 pin in the connector. They are used as:
*Out1: Pin1 and Pin2
*Out2: Pin3 and Pin4
If you want to control your floor heating or other high power devices, the relay box must be connected to a external power relay. All this must be done by a professional electrician.
With the relay box it is possible to make control of external devices. It can be a floor heater, water heater or lamps. It is up to you.
- The relay contact and connector is rated to Maximum 30 VDC or VAC / 3Amp. The contact is NO type.
- To activate the relay use SMS Out1 for contact 1, and Out2 for contact 2. Or use the app where the contact is included.
There are 4 pin in the connector. They are used as:
*Out1: Pin1 and Pin2
*Out2: Pin3 and Pin4
If you want to control your floor heating or other high power devices, the relay box must be connected to a external power relay. All this must be done by a professional electrician.
Last updated Fri, 26 Aug 2016 06:23